UNIFLEX TECH , designs & manufacture Flexible Printed Circuit Board (FPC) with competitive force within the FPC industry that provides first-class technology, quality products and outstanding services. Our R&D team possesses exceptional technological capabilities coupled with automation in mass production equipment, high precision process and further advancement in Multi-layered FPC. Uniflex gives a high priority to quality control and utilized Total Quality Management to improve product quality demand.
Single-sided FPC
Basic flexible printed circuit board, composite of one layer of copper foil. This provides greater flexibility. In addition, it is lightweight, thin and space saving.
Double-sided FPC
Uses double-sided copper foil to provides greater flexibility, accommodates higher density wiring compared with single-sided FPC.
Double access
Has the same construction as single sided copper foil but opening at cover layer provides access to both sides of the copper layer.
Multi-Layer FPC
A combination of single and/or double-sided flex circuits laminated with thermoset adhesive. Provides flexibility for complex wiring accommodated in limited space.
Capabilities
| Thickness Tolerance | Normal (mm) | Min Spec (mm) |
|---|---|---|
| Thickness Tolerance | ±0.03Mult Flex ±10% | ±0.02Mult Flex ±0.03 |
| FPC + Steel Sheet | NA | ±0.05 |
| FPC+PI or PET | ±0.03 | ±0.02 |
| CVL Punching Tolerance | Normal (mm) | Min Spec (mm) |
| Slotted tolerance | ±0.05 | ±0.05 |
| Slotted pitch | NA | ≥0.25 |
| Opening | ≥0.8 | ≥0.52 |
| Routing Tolerance | Type | Normal (mm) | Routing | Length Tolerance | ±0.10 |
| Width Tolerance | ±0.10 | |
| Hole to Outline Edge | ±0.15 | |
| Hole Tolerance | ±0.05 | |
| Out Radius Tolerance | ±0.05 | |
| Min Radius Size | min: 0.5 | |
| Min Trace Width & Space | Normal (mm) | Min Spec (mm) |
| Line width/space | 0.76/0.76 (S/S & D/S) | 0.05/0.05 (S/S & D/S) |
| under CVL line | > 3mil: ±0.03 | ≤ 3mil: ±20% |
| Line width/Line space tolerances | ±0.03 | ±0.02 |
| Annular Ring (A) | ±0.12 | ±0.075 (Typesetting length 320mm or less, Shall AE) MLB: 4.0mil typesetting length ≤ 300mm |
Applications
